Jupiter反弹后飙升17%——交易员仍押注JUP将回调

ambcryptoPublicado a 2026-03-02Actualizado a 2026-03-02

Resumen

木星币(JUP)从0.14美元低点反弹,单日涨幅达17.13%,触及两周高点0.176美元,并突破短期移动平均线EMA20,显示强劲上涨动能。活跃地址数增至1.33万,衍生品未平仓合约增长22%,净流入资金达196万美元,表明市场参与度提升。但币安和OKX平台的多空比率低于1,反映部分交易者仍看空。若买盘持续,JUP或进一步挑战0.2美元及EMA100(0.21美元)阻力位。然而,现货市场出现获利抛压,交易所净流入67.7万美元,若抛售加剧,价格可能回落至0.14美元。整体而言,JUP短期动能强劲,但需警惕回调风险。

Jupiter [JUP] 从0.14美元的下跌中反弹,攀升至两周高点0.176美元。在此过程中,Jupiter突破了其短期移动平均线EMA20,显示出强劲的上行动能。

截至发稿时,该山寨币交易价格为0.172美元,日涨幅达17.13%,周涨幅进一步扩大。价格的爆炸性上涨证实了所有市场参与者动能的增强。

事实上,在JUP跌至0.14美元的低点后,出现了新的需求,新用户趁机建仓。每日活跃地址增至13.3k,增加了200个,表明网络使用率有所提高。

Jupiter出现新的资金流入

有趣的是,投资者将最近的市场疲软视为部署资金的机会。在期货方面,该山寨币录得2501万美元的流入,相比之下流出为2305万美元。

因此,其净流入增长了194.3%,达到196万美元,反映出对期货头寸的需求增加。

与此同时,该山寨币的未平仓合约增加了22%,达到4407万美元,而衍生品交易量增长了53%,达到1.01亿美元。这两个指标的上升进一步验证了市场对期货头寸需求的增加。

然而,币安和OKX的市场参与者似乎预计会出现另一次回调。这是因为该山寨币的多空比率低于1,约为0.99,其中币安为0.93,OKX为0.89。

比率低于1表明空头头寸的需求更高,这意味着大多数参与者预计会出现另一次下跌。

上行动能是否可持续?

Jupiter显示出强劲的动能,因为在近期市场整体下跌后,投资者纷纷涌入市场,以折扣价积累筹码。

因此,该山寨币的上行动能得到加强。其相对强弱指数(RSI)升至55,进入看涨区域。

与此同时,价格突破了EMA20,目前正在测试EMA50,显示出强劲的上行动能。

当这些动量指标达到这样的水平时,表明买家信心增强,通常随后会出现更高的价格。

因此,如果当前情绪保持不变,并且有更多资金流入,JUP将突破EMA50(0.17美元),突破0.2美元,并瞄准EMA100(0.21美元)。

然而,这一看涨前景面临重大风险,并可能阻碍趋势的延续。在现货市场上,Jupiter反弹后,此前处于亏损状态的投资者急于套现。

该山寨币的交易所流入量超过了流出量,现货净流入增长了145%,达到67.7万美元。市场录得560万美元的流入,相比之下流出为490万美元。

如果这种抛售潮持续并加剧,市场回调仍将迫在眉睫。因此,JUP可能会再次跌至0.14美元,然后尝试另一次反弹。

最终总结

  • JUP飙升17%,在更广泛的市场复苏中触及0.176美元的局部高点。
  • Jupiter出现了新的投机需求,但由于获利了结者急于套现,回调的威胁仍然存在。

Preguntas relacionadas

QJupiter (JUP) 的价格在近期反弹中达到了多少美元的两周高点?

AJupiter (JUP) 的价格在近期反弹中攀升至0.176美元的两周高点。

Q根据文章,哪些关键指标显示了JUP期货头寸需求的增加?

AJUP的净流入量增长了194.3%至196万美元,未平仓合约(Open Interest)增长了22%至4407万美元,衍生品交易量(Derivatives Volume)增长了53%至1.01亿美元,这些指标都显示了期货头寸需求的增加。

Q币安(Binance)和OKX交易所的JUP多空比率(Long/Short Ratio)是多少?这代表了什么市场情绪?

A币安的JUP多空比率为0.93,OKX为0.89,综合比率为0.99,低于1。这表明空头头寸的需求更高,意味着大多数市场参与者预期价格会再次下跌。

Q文章中提到JUP价格持续上涨面临的主要风险是什么?

A主要风险是现货市场的获利了结压力。JUP反弹后,交易所流入量超过了流出量,现货净流入量(Spot Netflow)飙升了145%至67.7万美元。如果这种抛售持续并加剧,市场回调将不可避免。

Q从技术分析角度看,哪些信号表明了JUP的强劲上涨动量?

AJUP的相对强弱指数(RSI)上升至55,进入了看涨区域。同时,其价格突破了短期移动平均线EMA20,并且正在测试EMA50(位于0.17美元),这些都表明了强劲的上涨动量。

Lecturas Relacionadas

PANews Column Registration and Article Submission Guide

"PANews Column Registration and Submission Guide" provides instructions for users to register as columnists and publish articles on the PANews platform. Key application requirements are emphasized: content should focus on in-depth analysis within Crypto, Web3, blockchain, data, and viewpoints. Content primarily for brand/product introductions will not be approved, and heavily AI-generated content will be rejected. Promotional (PR/soft) content is directed to the business channel. **Registration Process:** * **Web:** Go to the official website footer, click "Apply for Column," and register with a phone number or email (login via verification code, no password). Fill in the column name, description, upload an avatar, and submit links to previously published work. * **Mobile:** Navigate to "My" -> "Contribute & Create" and complete the form. **Article Submission Tutorial:** 1. Log in to the PANews website. 2. Access the "Creator Center" from your personal homepage. 3. Use the editor to create and publish articles. **Video Upload:** The platform supports embedding videos from third-party sites (e.g., Bilibili). Copy the embed code from the source video, use the editor's "Insert/Edit media" button, paste the code under the "Embed" tab, and adjust the display size (recommended: width 100%, height 560px). **PANews Skills (AI Agent Tool):** PANews offers an official AI Agent skill set called PANews Skills, enabling AI tools to query platform content, track trends, and publish column articles directly. It includes three main skills: 1. `panews`: For tracking daily must-read lists, popular articles, and funding news. 2. `panews-creator`: For managing columns, publishing articles, and uploading images. 3. `panews-web-viewer`: For parsing PANews webpages into Markdown. These skills are compatible with various AI Agent tools (OpenClaw, Cursor, Claude Code, ChatGPT, Gemini, etc.). To use the `panews-creator` skill, users must obtain a specific authentication value from the PANews website after logging into their columnist account.

marsbitHace 11 min(s)

PANews Column Registration and Article Submission Guide

marsbitHace 11 min(s)

I Built Myself an Investment Workbench Using AI

For the past two weeks, I've been immersed in Vibe Coding—using AI to write code from natural language descriptions. This process has enabled me to quickly build functional tools that address long-standing personal ideas. Previously, I had many concepts but found execution too cumbersome. Key ideas included a unified dashboard for assets across US stocks, Crypto, HK stocks, and A-shares; a real-time alert system for price movements; an investment map visualizing sector relationships; and a tool to correlate prediction market bets with news and market data. Traditional development hurdles meant these often remained unrealized. Using AI (Codex, Claude Code, and DeepSeek API), I built four initial tools: 1. A **Cross-Market Asset Dashboard** showing total assets, daily P&L, and holdings by market, with added features for alerts and sector mapping. It's deployed locally for privacy. 2. A **Prediction Market (PM) Monitor** tracking bets on events (e.g., company valuations) and correlating probability shifts with news and market movements. I categorize bets by conviction to filter noise. 3. A **Simple Operations Backend** for managing my writing workflow (topics, progress, publishing). It's cloud-deployed for mobile access. 4. A **One-Click Formatting Tool** that automates converting drafts into various platform-specific formats, saving manual effort. While these tools are basic, they represent a significant shift: AI lowers the barrier to creating personalized systems. I believe individual investors can now feasibly build core systems for: * **Asset Observation** (tracking holdings and changes) * **Signal Monitoring** (watching for key market shifts) * **Sector Mapping** (understanding network relationships within a sector) * **Performance Review** (documenting rationale and outcomes) The power of Vibe Coding is its fast feedback loop. Ideas can be implemented, tested, and iterated on rapidly, turning "want-to-do" into "done." This marks the start of my new phase, where I'll share investment thoughts, tool tests, on-chain operations, and educational Web3 content.

marsbitHace 27 min(s)

I Built Myself an Investment Workbench Using AI

marsbitHace 27 min(s)

After Tokenization of Assets, How to Exit?

Title: How to Exit After Asset Tokenization? Author: Symbiotic Compiled by: Hu Tao, ChainCatcher Summary: Tokenization addresses how assets go on-chain but largely leaves the redemption question unresolved. While tokenized assets can settle instantly, the underlying redemption for assets like treasuries, private credit, or real estate can take from T+1 to 180 days. This gap hinders DeFi adoption of Real World Assets (RWAs). Three emerging models aim to provide instant exit liquidity, differing primarily in their capital structure and efficiency: 1. **Balance Sheet Model (e.g., Grove Basin):** A single entity (like Sky) provides immediate liquidity from its balance sheet, acting as a bridge during the settlement period. It offers simplicity and deep initial liquidity but is constrained by a single entity's capacity and risk appetite. 2. **Asset-Specific Vault Model (e.g., Upshift Clear):** Independent liquidity providers fund dedicated vaults for each supported asset, earning fees. It decentralizes capital sources but isolates liquidity and capital per asset, leading to potential fragmentation. 3. **Shared Liquidity Layer Model (e.g., Symbiotic Liquid Lane):** A shared capital pool supports multiple RWA types simultaneously. Funds remain productive between redemptions (e.g., earning yield in lending markets). Exits are settled via a competitive RFQ market. This model aims for higher capital efficiency, scalability across assets, and serves longer-duration assets like private credit. Key differentiators are: 1) Source of capital and risk bearer, 2) Redemption pricing mechanism, 3) Capital efficiency, 4) Scalability to new asset types, and 5) Composability. The shared liquidity layer model represents a move from piecemeal solutions toward scalable infrastructure, enabling T+0 exits by pooling capital, maintaining yield, and using competitive pricing, thus enhancing RWA utility in DeFi.

marsbitHace 40 min(s)

After Tokenization of Assets, How to Exit?

marsbitHace 40 min(s)

After Tokenizing Assets, How to Exit?

After tokenization, a key unresolved issue is providing holders with a reliable exit mechanism, as underlying asset settlement (taking days to months) lags far behind on-chain token settlement. Three primary models for instant liquidity have emerged, differing in their capital structure and efficiency: 1. **Balance Sheet Model (e.g., Grove Basin):** A single, well-capitalized entity (like Sky) provides immediate liquidity from its own reserves. This offers simplicity and deep initial liquidity but is constrained by that single balance sheet's capacity and risk appetite, limiting scalability. 2. **Dedicated Vault Model (e.g., Upshift Clear):** Independent liquidity providers (LPs) fund separate vaults for each supported asset. This decentralizes capital sources but isolates liquidity and capital, which becomes inefficient as the number of tokenized assets grows. 3. **Shared Liquidity Layer Model (Symbiotic Liquid Lane):** Independent capital providers fund shared vaults that can support multiple tokenized assets simultaneously. Capital remains productive between redemptions (e.g., earning yield in DeFi markets). Exits are settled via a competitive RFQ market where market makers bid. The article argues that the shared layer model offers superior capital efficiency and scalability. It transforms exit liquidity from an asset-specific patch into shared market infrastructure, allowing liquidity capacity to grow with overall market participation rather than being fragmented per asset. This is particularly valuable for longer-duration assets like private credit, where reliable T+0 exits can significantly enhance their utility in DeFi.

链捕手Hace 53 min(s)

After Tokenizing Assets, How to Exit?

链捕手Hace 53 min(s)

Trading

Spot
Futuros

Artículos destacados

Cómo comprar JUP

¡Bienvenido a HTX.com! Hemos hecho que comprar Jupiter (JUP) sea simple y conveniente. Sigue nuestra guía paso a paso para iniciar tu viaje de criptos.Paso 1: crea tu cuenta HTXUtiliza tu correo electrónico o número de teléfono para registrarte y obtener una cuenta gratuita en HTX. Experimenta un proceso de registro sin complicaciones y desbloquea todas las funciones.Obtener mi cuentaPaso 2: ve a Comprar cripto y elige tu método de pagoTarjeta de crédito/débito: usa tu Visa o Mastercard para comprar Jupiter (JUP) al instante.Saldo: utiliza fondos del saldo de tu cuenta HTX para tradear sin problemas.Terceros: hemos agregado métodos de pago populares como Google Pay y Apple Pay para mejorar la comodidad.P2P: tradear directamente con otros usuarios en HTX.Over-the-Counter (OTC): ofrecemos servicios personalizados y tipos de cambio competitivos para los traders.Paso 3: guarda tu Jupiter (JUP)Después de comprar tu Jupiter (JUP), guárdalo en tu cuenta HTX. Alternativamente, puedes enviarlo a otro lugar mediante transferencia blockchain o utilizarlo para tradear otras criptomonedas.Paso 4: tradear Jupiter (JUP)Tradear fácilmente con Jupiter (JUP) en HTX's mercado spot. Simplemente accede a tu cuenta, selecciona tu par de trading, ejecuta tus trades y monitorea en tiempo real. Ofrecemos una experiencia fácil de usar tanto para principiantes como para traders experimentados.

122 Vistas totalesPublicado en 2024.12.12Actualizado en 2026.06.02

Cómo comprar JUP

Discusiones

Bienvenido a la comunidad de HTX. Aquí puedes mantenerte informado sobre los últimos desarrollos de la plataforma y acceder a análisis profesionales del mercado. A continuación se presentan las opiniones de los usuarios sobre el precio de JUP (JUP).

活动图片